Roof operation up to 45 km/h (configurable in 5 km/h steps)
Window position can be configured - only for roof opening - (options are: windows open / windows close)
Flash hazard can be activated during roof operation (only for remote operations)
Indoor roof switch reversing
Seamless roof operation:
roof operation will continue if you open / close the roof with the remote key and turn the ignition on/off
roof operation will continue if you open / close the roof with the indoor key and pull out the key
Characteristics of Comfort Module
Due to safety concerns all operations can be interrupted
Roof operation will resume in case of over speeding, i.e: if you start a roof operation and drive faster than the specified max speed the roof operation will automatically resume by driving less than the max speed within 10 seconds.
12Volt (8 - 15 Volt)
Dimensions in mm
54 x 45 x 22
Scope of delivery
Comfort - Module
In the standby mode, each device consumes a small amount of power. Even complex vehicle controllers should not need more than 2.0mA to avoid an empty battery after a long standing time, e.g. after a holiday. Due to quality engineering and manufacturing, this module requires less than 0.03mA.
This device does not include any crush detection; therefore this module should only be used exercising caution and responsibility.
Kufatec and the administrators of this website can NOT be held liable for any damage or injury caused by installing or using this product.